SERVICE MANUAL –Post eVolve Smart
4 - DEVICE OVERVIEW
CIRCONTROL, S.A. – Innovació, 3 – 08232 – Viladecavalls (Barcelona)
Tel.: +34 937 362 940 – Fax: +34 937 362 941 8
Web: www.circontrol.com – E-mail: circontrol@circontrol.com
4 DEVICE OVERVIEW
4.1 FEATURES
• Display: Information about the status of the connectors and detailed data as
energy (kWh) and charge duration.
• Connector Lock: Type 2 connector has a lock system to avoid disconnection of
EV meanwhile is charging.
• Light beacon: Three colour LED indicates the status of the connectors.
• RFID: User identification.
• Ethernet: TCP/IP communication for remote supervision and configuration.
• 3G Modem (optional): For those places where wired communications are not
enough.
• Energy metering: Integrated meter that measures power and energy consumed
by the EV during a charge transaction.
• Remote access: For supervision and control from everywhere.
• Charge transaction history: Charge Point can store information about the
charge transactions.
• OCPP: Open standard communication protocol, allows communication between
the Charge Point and the Central System.
To Next Page
Loading...