SERVICE MANUAL –Post eVolve Smart
10 - CHARGE POINT ADVANCED SETTINGS
CIRCONTROL, S.A. – Innovació, 3 – 08232 – Viladecavalls (Barcelona)
Tel.: +34 937 362 940 – Fax: +34 937 362 941 69
Web: www.circontrol.com – E-mail: circontrol@circontrol.com
10.2 CHARGE POINT MAXIMUM CURRENT OUTPUT FOR EACH
PLUG
In case that the power supplied to the Charge Point is lower than the power that can be
supplied by the Charge Point, the Charge Point can limit the maximum out-put current.
Use Charge Point Setup tool to set a lower current rate.
This section is dedicated only to the Charge Points with one socket/outlet Type 2.
Models affected:
• Post eVolve Smart T-one
• Post eVolve Smart S-one
• Post eVolve Smart C63-one
To Next Page
Loading...