SERVICE MANUAL –Post eVolve Smart
4 - DEVICE OVERVIEW
CIRCONTROL, S.A. – Innovació, 3 – 08232 – Viladecavalls (Barcelona)
Tel.: +34 937 362 940 – Fax: +34 937 362 941 9
Web: www.circontrol.com – E-mail: circontrol@circontrol.com
4.2 PRODUCT EVOLUTION
Post eVolve Smart is a Smart Charge Point created in 2016 and it has been evolving to
these days. For this reason, the Charge Point has different versions of its internal
components’ distribution called phase I and phase II.
The main purpose of these changes is to upgrade the components and optimise the inner
space distribution.
Other minor changes such as software, firmware, communication between components,
etc., provide more features to the Charge Points.
Some components are incompatible between the two phases. These incompatibilities
are indicated for each device in this manual in their own section.
4.3 DIMENSIONS
To Next Page
Loading...