1-40
Catalyst 6500 Series Switches Installation Guide
OL-5781-04
Chapter 1 Product Overview
Catalyst 6509-NEB Switch
Fan Tray • Supports one hot-swappable fan tray. These fan tray models are
supported:
–
WS-C6509-NEB-FAN (Standard fan tray—294 CFM). Supports
Supervisor Engine 1 and Supervisor Engine 2 only; does not
support Supervisor Engine 32 or Supervisor Engine 720.
–
WS-6509-NEB-UPGRD
1
—630 CFM (The fan tray is a part of the
upgrade kit). This kit must be installed if you are installing a
Supervisor Engine 32 or a Supervisor Engine 720 in the
Catalyst 6509-NEB switch. The kit contains a high-speed fan tray,
back panel, and power harness. If you are operating the chassis from
an AC source, you will also need to order a 3000 W AC-input power
supply which has a front panel DC power connector. The upgrade
kit fan tray receives 42 VDC power from this front panel DC power
connector through a power harness also provided in the upgrade kit.
If you are operating the chassis from a DC source, you can power
the system with either the 2500 W or 4000 W DC-input power
supplies and power the upgrade fan tray from the site source DC.
Note Both fan tray models contain nine individual fans. The
individual fans are not field replaceable. You must replace the
fan tray.
• Fan tray STATUS LED
–
Red—One or more individual fans have failed.
–
Green—Fan tray is operating normally.
Table 1-15 Catalyst 6509-NEB Switch Features (continued)
Feature Features
To Next Page
Loading...
Need help?
General