Cisco 6509 - Catalyst Chassis Switch User Manual

1-52
Catalyst 6500 Series Switches Installation Guide
OL-5781-04
Chapter 1 Product Overview
Catalyst 6513 Switch
Power Supply • Supports one or two power supplies. The following models are
supported:
– WS-CAC-2500W (2500 W AC-input power supply).
– WS-CDC-2500W (2500 W DC-input power supply).
– WS-CAC-3000W (3000 W AC-input power supply).
– WS-CAC-4000W-US (4000 W AC-input power supply).
– WS-CAC-4000W-INT (4000 W AC-input power supply).
– PWR-4000-DC (4000 W DC-input power supply).
– WS-CAC-6000W (6000 W AC-input power supply).
• Installed power supplies can be of different ratings. Installed power
supplies can also be both AC-input, both DC-input, or one AC-input and
one DC-input. Power supplies can be configured in either redundant or
non-redundant mode.
• All Catalyst 6500 series AC-input power supplies require single-phase
source AC. Source AC can be out of phase between multiple power
supplies or multiple AC-power plugs on the same power supply because
all AC power supply inputs are isolated.
• You must install a 2500 W or higher capacity power supply when using
the Supervisor Engine 32 or the Supervisor Engine 720 and the
high-speed fan tray.
Table 1-19 Catalyst 6513 Switch Features (continued)
Feature Description

Cisco 6509 - Catalyst Chassis Switch Specifications

General

Brand	Cisco
Model	6509 - Catalyst Chassis Switch
Category	Switch
Language	English