1-57
Catalyst 6500 Series Switch Module Installation Guide
78-15725-02
Chapter 1 Product Overview
Multilayer Switch Module (WS-X6302-MSM)
The CONSOLE PORT MODE switch allows you to connect a terminal to the
MSM using either a Catalyst 5000 family Supervisor Engine III console cable or
the console cable and adapters provided with the switch. You also can connect a
modem to the console port using the cable and adapter provided with the switch.
Note Use a paper clip or a small, pointed object to access the CONSOLE PORT MODE
switch.
Table 1-11 Multilayer Switch Module STATUS LED
Color/State Description
Green All diagnostics pass; the module is operational.
Orange The module is booting or running diagnostics.
An overtemperature condition has occurred. (A minor temperature
threshold has been exceeded during environmental monitoring.)
Red A diagnostic test has failed; the module is not operational.
An overtemperature condition has occurred. (A major temperature
threshold has been exceeded during environmental monitoring.)
To Next Page
Loading...
