Cisco MWR 2941 - Page 110

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
continuity-check
92
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
Output of the show running all command displays “continuity-check interval 1s” when the default
interval period is configured and “continuity-check loss-threshold 3” when the default loss threshold is
configured.
Examples The following example shows how to configure a loss threshold of 50 CCMs:
Router(config)# ethernet cfm domain operatorA level 5
Router(config-ecfm)# service vlan-id 10 port
Router(config-ecfm-srv)# continuity-check loss-threshold 50
Router(config-ecfm-srv)#
Related Commands Command Description
mep mpid Statically defines MEPs within a maintenance association.
show running all Shows the running configuration with default values.