Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show cns config outstanding
469
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
show cns config outstanding
To display information about incremental (partial) Cisco Networking Services (CNS) configurations
that have started but not yet completed, use the show cns config outstanding command in privileged
EXEC mode.
show cns config outstanding
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC (#)
Command History
Usage Guidelines Use the show cns config outstanding command to display information about outstanding incremental
(partial) configurations that have started but not yet completed, including the following:
• Queue ID (location of configuration in the config queue)
• Identifier (group ID)
• Config ID (identity of configuration within the group)
Examples The following is sample output from the show cns config outstanding command:
Router# show cns config outstanding
The outstanding configuration information:
queue id identifier config-id
1 identifierREAD config_idREAD
Related Commands
Release Modification
12.2(2)T This command was introduced.
12.2(8)T This command was implemented on Cisco 2600 series and Cisco 3600 series
routers.
12.2(33)SB This command was integrated into Cisco IOS Release 12.2(33)SB.
12.2(33)SXI This command was integrated into Cisco IOS Release 12.2(33)SXI.
12.4(20)MR This command was integrated into Cisco IOS Release 12.4(20)MR.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR.
Command Description
cns config cancel Cancels an incremental two-phase synchronization configuration.
config-cli Displays the status of the CNS event agent connection.
show cns config stats Displays statistics about the CNS configuration agent.
To Next Page
Loading...
