Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
clear link-protection statistics
58
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
clear link-protection statistics
To clear the counters for a link protection port, use the show link-protection statistics command in user
EXEC or privileged EXEC mode.
clear link-protection statistics [interface interface-name slot/port]
Syntax Description
Command Modes User EXEC (>)
Privileged EXEC (#)
Command History
Usage Guidelines This command only applies to Gigabit Ethernet interfaces.
Examples The following examples provide sample output from the show link-protection statistics command:
Router# clear link-protection statistics
Router#
Related Commands
interface Specifies the interface connected to the clock input.
interface-name The name of the interface connected to the clock input.
slot The slot in which card is inserted.
port The port of the card.
Release Modification
15.0(1)MR This command was introduced.
Command Description
show link
protection-group
statistics
Displays the counters for a link protection port.
To Next Page
Loading...
