Cisco MWR 2941 - Show Atm Cell-Packing

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show atm cell-packing
459
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
show atm cell-packing
To display cell packing information for the Layer 2 attachment circuits (ACs) configured on your
system, use the show atm cell-packing command in privileged EXEC mode.
show atm cell-packing
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC
Command History
Examples The following example shows output from the show atm cell-packing command:
Router# show atm cell-packing
avg # avg #
Circuit local cells/pkt negotiated cells/pkt MCPT
Type MNCP rcvd MNCP sent (us)
ATM0/2/0/1.200 vc 1/200 1 0 1 0 50
ATM0/2/0/1.300 vc 1/300 1 0 1 0 50
Related Commands
Release Modification
12.4(19)MR2 This command was integrated into Cisco IOS Release 12.4(19)MR2.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR.
Command Description
cell-packing Packs multiple ATM cells into each MPLS or L2TPv3 packet.
atm cell-packing Packs multiple ATM cells into each MPLS or L2TPv3 packet.