Cisco MWR 2941 - Shape (Percent)

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
shape (percent)
442
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
shape (percent)
To specify average or peak rate traffic shaping on the basis of a percentage of bandwidth available on
an interface, use the shape command in policy-map class configuration mode. To remove traffic
shaping, use the no form of this command.
shape {average | peak} percent percentage [sustained-burst-in-msec ms] [be excess-burst-in-msec
ms] [bc committed-burst-in-msec ms]
no shape {average | peak} percent percentage [sustained-burst-in-msec ms] [be
excess-burst-in-msec ms] [bc committed-burst-in-msec ms]
Syntax Description
Command Default The default bc and be is 4 ms.
Command Modes Policy-map class configuration (config-pmap-c)
Command History
average Specifies average rate traffic shaping.
peak Specifies peak rate traffic shaping.
percent Specifies that a percent of bandwidth will be used for either the average
rate traffic shaping or peak rate traffic shaping.
percentage Specifies the bandwidth percentage. Valid range is a number from 1
to 100.
sustained-burst-in-msec (Optional) Sustained burst size used by the first token bucket for policing
traffic. Valid range is a number from 4 to 200.
ms (Optional) Indicates that the burst value is specified in milliseconds (ms).
be (Optional) Excess burst (be) size used by the second token bucket for
policing traffic.
excess-burst-in-msec (Optional) Specifies the be size in milliseconds. Valid range is a number
from 0 to 200.
bc (Optional) Committed burst (bc) size used by the first token bucket for
policing traffic.
committed-burst-in-msec (Optional) Specifies the bc value in milliseconds. Valid range is a number
from 1 to 2000.
Release Modification
12.1(2)T This command was introduced.
12.2(13)T This command was modified for the Percentage-Based Policing and
Shaping feature.
12.0(28)S The command was integrated into Cisco IOS Release 12.0(28)S.
12.2(18)SXE The command was integrated into Cisco IOS Release 12.2(18)SXE.
12.2(28)SB The command was integrated into Cisco IOS Release 12.2(28)SB.
12.4(20)MR This command was integrated into Cisco IOS Release 12.4(20)MR.