Cisco MWR 2941 - Show Cns Event Connections

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show cns event connections
472
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
show cns event connections
To display the status of the Cisco Networking Services (CNS) event agent connection, use the show cns
event connections command in privileged EXEC mode.
show cns event connections
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC (#)
Command History
Usage Guidelines Use the show cns event connections command to display the status of the event agent connection—such
as whether it is connecting to the gateway, connected, or active—and to display the gateway used by the
event agent and its IP address and port number.
Examples The following example displays the IP address and port number of the primary and backup gateways:
Router# show cns event connections
The currently configured primary event gateway:
hostname is 10.1.1.1.
port number is 11011.
Event-Id is Internal test1
Keepalive setting:
none.
Connection status:
Connection Established.
The currently configured backup event gateway:
none.
The currently connected event gateway:
hostname is 10.1.1.1.
port number is 11011.
Release Modification
12.2(8)T This command was introduced.
12.2(25)S This command was integrated into Cisco IOS Release 12.2(25)S.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SB This command was integrated into Cisco IOS Release 12.2(33)SB.
12.2(33)SXI This command was integrated into Cisco IOS Release 12.2(33)SXI.
12.4(20)MR This command was integrated into Cisco IOS Release 12.4(20)MR.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR.