Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
clear switch tail-drop accounting
63
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
clear switch tail-drop accounting
To reset the counters for tail-drop accounting, use the clear switch tail-drop accounting command in
privileged EXEC mode.
clear switch tail-drop accounting
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Privileged EXEC (#)
Command History
Usage Guidelines You can use tail drop accounting to monitor packet drops on an interface or queue, on a per-class or
per-port basis.
Examples The following example shows how to use the clear switch tail-drop accounting command.
Router# clear switch tail-drop accounting
Related Commands
Release Modification
12.2(33)MRB4 This command was introduced.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR.
Command Description
switch tail-drop
accounting
Enables tail drop accounting on an interface or on a specific queue on an
interface.