Cisco MWR 2941 - Show Platform Hardware

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show platform hardware
565
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
show platform hardware
To display the status of hardware devices on the Cisco MWR 2941, use the show platform hardware
command. The command displays information about hardware devices on the Cisco MWR 2941 for
troubleshooting and debugging purposes.
show platform hardware {adrian | bits | cpld | cpu | ethernet | fio | hwic | rtm | stratum | ufe
winpath
Syntax Description
Command Modes Privileged EXEC
Command History
Related Commands
adrian Displays information about the adrian hardware.
bits Displays information about the BITS hardware.
cpld Displays information about the CPLD hardware.
cpu Displays information about the CPU.
ethernet Displays information about the ethernet interfaces on the Cisco MWR 2941.
fio Displays information about the FIO fpga hardware.
hwic Displays information about the HWICs installed on the Cisco MWR 2941.
rtm Displays information about the RTM Module (ASM-M2900-TOP daughter card).
stratum Displays information about the stratum hardware.
ufe Displays information about the UFE hardware.
winpath Displays information about the Winpath hardware.
Release Modification
12.4(19)MR2 This command was incorporated.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR.
Command Description
show controller Displays the status of system controllers.