Cisco MWR 2941 - Show Ethernet Cfm Maintenance-Points Remote Detail

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show ethernet cfm maintenance-points remote detail
504
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
show ethernet cfm maintenance-points remote detail
To display information about a remote maintenance point in the continuity check database, use the show
ethernet cfm maintenance-points remote detail command in privileged EXEC mode.
CFM IEEE 802.1ag Standard (CFM IEEE)
show ethernet cfm maintenance-points remote detail {mac mac-address | mpid id} [domain
domain-name [port | vlan vlan-id]]
Syntax Description
Command Default When no options are specified, all remote maintenance endpoints (MEPs) matching the specified MAC
address or maintenance point ID (MPID) are displayed.
Command Modes Privileged EXEC (#)
mac Shows a remote MAC address.
mac-address MAC address of the remote maintenance point, in the format
abcd.abcd.abcd.
mpid Shows a remote maintenance point.
id Integer from 0 to 8191 that identifies the maintenance point.
domain (Optional) Shows a specific maintenance domain.
domain-name (Optional) String of a maximum of 154 characters.
port (Optional) Shows the operational state of the port MEP.
vlan (Optional) Shows a VLAN configuration.
vlan-id (Optional) Integer from 1 to 4094 that identifies the VLAN.