Cisco MWR 2941 - Show Interface Switchport Backup

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show interface switchport backup
535
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
show interface switchport backup
Displays status information about the backup switchport.
show interface switchport backup
Command Modes Privileged EXEC
Command History
Examples The following example shows the output generated by this command:
Router# show interface switchport backup
Switch Backup Interface Pairs:
Active Interface Backup Interface State
------------------------------------------------------------------------
GigabitEthernet0/0 GigabitEthernet0/5 Active Down/Backup Down
Related Commands
Release Modification
12.4(19)MR2 This command was introduced.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR.
Command Description
switchport backup interface Configures a backup interface pair.