Cisco MWR 2941 - Page 582

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show network-clocks synchronization
564
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
Router# show network-clock synchronization
Symbols: En - Enable, Dis - Disable, Adis - Admin Disable
NA - Not Applicable
* - Synchronization source selected
# - Synchronization source force selected
& - Synchronization source manually switched
Automatic selection process : Enable
Equipment Clock : 2048 (EEC-Option1)
Clock Mode : QL-Disable
SSM Option : 1
T0 : Ethernet0/1
Hold-off (global) : 200 ms
Wait-to-restore (global) : 5 sec
Revertive : Yes
Nominated Interfaces
Interface SigType Mode/QL Prio QL_IN ESMC Tx ESMC Rx
Internal NA NA/Dis 251 NA Dis Dis
Et0/0 NA Async/Dis 4 NA Dis Dis
*Et0/1 NA Async/Dis 3 NA Dis Dis
Et0/2 NA Async/Dis 1 NA Dis Dis
T4 Out
External Interface SigType Input Prio Squelch AIS
external 0/0/0 10M Et0/1 1 FALSE FALSE
external 0/0/0 E1 Et0/1 1 FALSE FALSE