Cisco MWR 2941 - Page 193

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
instance (VLAN)
175
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
Router(config-mst)# instance 5 vlan 1100
Router(config-mst)#
The following example shows how to move a range of VLANs from instance 2 to the CIST instance:
Router(config-mst)# no instance 2 vlan 40-60
Router(config-mst)#
The following example shows how to move all the VLANs that are mapped to instance 2 back to the
CIST instance:
Router(config-mst)# no instance 2
Router(config-mst)#
Related Commands Command Description
name (MST
configuration mode)
Sets the name of an MST region.
revision Sets the revision number for the MST configuration.
show Verifies the MST configuration.
show spanning-tree
mst
Displays the information about the MST protocol.
spanning-tree mist
configuration
Enters MST configuration mode.