Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
ip load-sharing
181
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
Examples The following example shows how to enable per-packet load balancing:
Router(config)# interface E0
Router(config-if)# ip load-sharing per-packet
The following example shows how to enable per-destination load balancing:
Router(config)# interface E0
Router(config-if)# ip load-sharing per-destination
Related Commands Command Description
ip cef Enables CEF on the RP card.