Cisco MWR 2941 - Page 203

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
ip multicast-routing
185
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
Examples The following example shows how to enable IP multicast routing:
Router(config)# ip multicast-routing
The following example shows how to enable IP multicast routing for a specific VRF:
Router(config)# ip multicast-routing vrf vrf1
The following example shows how to disable IP multicast routing:
Router(config)# no ip multicast-routing
Related Commands Command Description
ip pim Enables PIM on an interface.