Cisco MWR 2941 - Page 219

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
l2protocol-tunnel
201
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
Examples This example shows how to enable a tunneling protocol on an interface:
Router(config-if)# l2protocol-tunnel cdp
Router(config-if)#
This example shows how to disable a tunneling protocol on an interface:
Router(config-if)# no l2protocol-tunnel
Protocol tunneling disabled on interface fastEthernet 4/1
Router(config-if)#
Related Commands Command Description
show
l2protocol-tunnel
Displays the protocols that are tunneled on an interface or on all interfaces.
switchport Modifies the switching characteristics of the Layer 2-switched interface.