Cisco MWR 2941 - Page 269

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
mpls ldp router-id
251
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
Examples The following example shows that the POS2/0/0 interface has been specified as the preferred interface
for the LDP router ID. The IP address of that interface is used as the LDP router ID.
Router(config)# mpls ldp router-id pos2/0/0
The following example shows that the Ethernet 1/0 interface, which is associated with the VRF vpn-1,
is the preferred interface. The IP address of the interface is used as the LDP router ID.
Router(config)# mpls ldp router-id vrf vpn-1 eth1/0
Related Commands Command Description
show mpls ldp discovery Displays the status of the LDP discovery process.