Cisco MWR 2941 - Page 286

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
network-clock output-source
268
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
Defaults Clocking output is disabled by default.
Command Modes Global configuration (config)
Command History
Usage Guidelines The router selects clock output interfaces based on the priority value of the clock output source.
Examples This example shows how to configure an output clock source:
Router(config)# network-clock output-source 10 10m
Router(config)#
Related Commands
Release Modification
15.0(1)MR This command was introduced.
Command Description
network-clock
input-source
Selects an interface or external timing input as a clock source and sets a
priority for the clock.
network-clock
output-source line
Transmits clocking received from an external source to another external
device using timing output interfaces.