Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
ais
12
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
Examples The following example shows how to enable the AIS function at level 5 with a transmission period of
one second:
Router(config)# ethernet cfm domain operatorA level 5
Router(config-ecfm)# service vlan-id 10 port
Router(config-ecfm-srv)# ais period 1
Router(config-ecfm-srv)# ais level 5
Related Commands Command Description
ethernet cfm global Enables connectivity fault management (CFM) globally on a device.
To Next Page
Loading...
