Cisco MWR 2941 - Page 347

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
pseudowire-class
329
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
Examples The following example shows how to enter pseudowire-class configuration mode to configure a PW
configuration template named “ether-pw”:
Router# config t
Router(config)# pseudowire-class mpls
Router(config-pw-class)# encapsulation mpls
Router(config-pw-class)# exit
Router(config)# exit
Related Commands Command Description
pseudowire Binds an attachment circuit to a Layer 2 PW for an xconnect service.
xconnect Binds an attachment circuit to an Layer 2 PW for an xconnect service
and then enters xconnect configuration mode.