Cisco MWR 2941 - Page 422

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
set atm-clp
404
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
Examples The following example illustrates setting the CLP bit using the set atm-clp command in the policy map:
Router(config)# class-map ip-precedence
Router(config-cmap)# match ip precedence 0 1
Router(config-cmap)# exit
Router(config)# policy-map atm-clp-set
Router(config-pmap)# class ip-precedence
Router(config-pmap-c)# set atm-clp
Router(config-pmap-c)# exit
Router(config-pmap)# exit
Router(config)# interface atm 1/0/0.1
Router(config-if)# service-policy output policy1
Related Commands Command Description
policy-map Creates or modifies a policy map that can be attached to one or more
interfaces to specify a service policy.
show atm pvc Displays all ATM PVCs and traffic information.
show policy-map Displays information about the policy map for an interface.