Cisco MWR 2941 - Page 457

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
set qos-group
439
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
Related Commands Command Description
match input vlan Configures a class map to match incoming packets that have a specific
VLAN ID.
match qos-group Identifies a specified QoS group value as a match criterion.
mls qos trust Sets the trusted state of an interface to determine which incoming QoS field
on a packet, if any, should be preserved.
policy-map Creates or modifies a policy map that can be attached to one or more
interfaces to specify a service policy.
service-policy Attaches a policy map to an input interface or VC, or an output interface or
VC, to be used as the service policy for that interface or VC.
show policy-map Displays the configuration of all classes for a specified service policy map
or all classes for all existing policy maps.
show policy-map
interface
Displays the configuration of all classes configured for all service policies
on the specified interface or displays the classes for the service policy for a
specific PVC on the interface.