Cisco MWR 2941 - Page 473

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show
455
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
This example shows how to display the current configuration:
Router(config-mst)# show current
Current MST configuration
Name []
Revision 0
Instance Vlans mapped
-------- ---------------------------------------------------------------------
0 1-4094
-------------------------------------------------------------------------------
Related Commands Command Description
instance Maps a VLAN or a set of VLANs to an MST instance.
name (MST configuration submode) Sets the name of an MST region.
revision Sets the revision number for the MST configuration.
show spanning-tree mst Displays the information about the MST protocol.
spanning-tree mst configuration Enters MST-configuration submode.