Cisco MWR 2941 - Page 519

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show ethernet cfm maintenance-points remote
501
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
Related Commands
Age Amount of time, in seconds, the entry has been in the
database.
PtSt Operational state of the port MEP. Values are:
UP—Operational.
DOWN—Not operational.
ADMINDOWN—Administratively down.
REMOTE_EE—Encountered excessive remote errors.
LOCAL_EE—Encountered excessive local errors.
TEST—Test state.
Table 21 show ethernet cfm maintenance-points remote Field Descriptions (continued)
Field Description
Command Description
show ethernet cfm
maintenance-points local
Displays information about maintenance points configured on a
device.
show ethernet cfm
maintenance-points remote
crosscheck
Displays information about remote maintenance points configured
statically in a cross-check list.
show ethernet cfm
maintenance-points remote
detail
Displays information about a remote maintenance point in the
continuity check database.