Cisco MWR 2941 - Page 663

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
spanning-tree portfast bpdufilter default
645
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
Examples This example shows how to enable BPDU filtering by default:
Router(config)# spanning-tree portfast bpdufilter default
Router(config)#
Related Commands Command Description
show spanning-tree mst Displays the information about the MST protocol.
spanning-tree bpdufilter Enables BPDU filtering on the interface.