Cisco MWR 2941 - Page 696

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
ubr+
678
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
Related Commands Command Description
encapsulation Sets the encapsulation method used by the interface.
protocol (ATM) Configures a static map for an ATM PVC, SVC, VC class, or VC bundle.
ubr Configures UBR QoS and specifies the output peak cell rate for an ATM PVC,
SVC, VC class, or VC bundle member.
vbr-nrt Configures the VBR-NRT QoS and specifies output peak cell rate, output
sustainable cell rate, and output maximum burst cell size for an ATM PVC, SVC,
VC class, or VC bundle member.
vbr-rt Configures variable bit rate real-time for VoATM voice connections.