Cisco MWR 2941 - Page 701

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
vbr-nrt
683
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
Related Commands Command Description
encapsulation Sets the encapsulation method used by the interface.
protocol (ATM) Configures a static map for an ATM PVC, SVC, VC class, or VC bundle, and
enables Inverse ARP or Inverse ARP broadcasts on an ATM PVC by either
configuring Inverse ARP directly on the PVC, on the VC bundle, or in a VC
class (applies to IP and IPX protocols only).
ubr Configures UBR QoS and specifies the output peak cell rate for an ATM
PVC, SVC, VC class, or VC bundle member.
ubr+ Configures UBR QoS and specifies the output peak cell rate and output
minimum guaranteed cell rate for an ATM PVC, SVC, VC class, or VC
bundle member.