Cisco MWR 2941 - Page 88

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
cns config partial
70
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
<wsse:Security xmlns:wsse="http://schemas.xmlsoap.org/ws/2002/04/secext"
SOAP:mustUnderstand="true">
<wsse:UsernameToken>
<wsse:Username>user1</wsse:Username>
<wsse:Password>password1</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
<CNS:cnsHeader Version="2.0" xmlns:CNS="http://www.cisco.com/management/cns/envelope">
<CNS:Agent>CNS_CONFIG</CNS:Agent>
<CNS:Response>
<CNS:correlationID>SOAP_IDENTIFIER</CNS:correlationID>
</CNS:Response>
<CNS:Time>2005-09-13T08:34:36.523Z</CNS:Time>
</CNS:cnsHeader>
</SOAP:Header>
<SOAP:Body xmlns="http://www.cisco.com/management/cns/config">
<configResults version="2.0" overall="Success">
<configId>AAA</configId>
</configResults>
</SOAP:Body>
</SOAP:Envelope>
Related Commands Command Description
cns config initial Starts the CNS configuration agent and initiates an initial configuration.
cns event Enables and configures CNS event agent services.
cns trusted-server Specifies a trusted server for CNS agents.
show cns config
outstanding
Displays information about incremental CNS configurations that have
started but are not yet completed.