Cisco MWR 2941 - Page 94

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
cns event
76
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
Examples The following example shows how to set the address of the primary CNS event gateway to the
configuration engine software running on IP address 10.1.2.3, port 11011, with a keepalive of
60 seconds and a retry count of 5:
Router(config)# cns event 10.1.2.3 11011 keepalive 60 5
Related Commands Command Description
cns id Sets the unique event ID, config ID, or image ID used by CNS services.
cns password Configures a CNS password.
show cns event status Displays status information about the CNS event agent.