Cisco MWR 2941 - Page 96

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
cns exec
78
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
In previous Cisco IOS releases, the CNS exec agent was enabled when the CNS configuration agent was
enabled through the cns config partial command.
Examples The following example shows how to enable the CNS exec agent with an IP address of 10.1.2.3 for the
exec agent server, a port number of 93, and a source IP address of 172.17.2.2:
Router(config)# cns exec 10.1.2.3 93 source 172.17.2.2
Related Commands Command Description
cns event Enables and configures CNS event agent services.
show cns event subject Displays a list of CNS event agent subjects that are subscribed to by
applications.