Cisco Nexus 5500 Series - Feature Privilege

107
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter F Commands
feature privilege
feature privilege
To enable the cumulative privilege of roles for command authorization on RADIUS and TACACS+
servers, use the feature privilege command. To disable the cumulative privilege of roles, use the no form
of this command.
feature privilege
no feature privilege
Syntax Description This command has no arguments or keywords.
Command Default Disabled
Command Modes Global configuration mode
Command History
Usage Guidelines When the feature privilege command is enabled, privilege roles inherit the permissions of lower level
privilege roles.
Examples This example shows how to enable the cumulative privilege of roles:
switch(config)# feature privilege
switch(config)#
This example shows how to disable the cumulative privilege of roles:
switch(config)# no feature privilege
switch(config)#
Related Commands
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
enable Enables a user to move to a higher privilege level.
enable secret priv-lvl Enables a secret password for a specific privilege level.
show feature Displays the features enabled or disabled on the switch.
show privilege Displays the current privilege level, username, and status of cumulative
privilege support.
username Enables a user to use privilege levels for authorization.