283
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show ip arp inspection
show ip arp inspection
To display the Dynamic ARP Inspection (DAI) configuration status, use the show ip arp inspection
command.
show ip arp inspection
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Any command mode
Command History
Examples This example shows how to display the status of the DAI configuration:
switch# show ip arp inspection
Related Commands
Release Modification
5.0(3)N1(1) This command was introduced.
Command Description
ip arp inspection vlan Enables DAI for a specified list of VLANs.
show ip arp inspection
interface
Displays the trust state and the ARP packet rate for a specified
interface.
show ip arp inspection log Displays the DAI log configuration.
show ip arp inspection
statistics
Displays the DAI statistics.
show ip arp inspection vlan Displays DAI status for a specified list of VLANs.
show running-config dhcp Displays DHCP snooping configuration, including the DAI
configuration.
To Next Page
Loading...
