Cisco Nexus 5500 Series - description (interface)

26
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter C Commands
clear checkpoint database
clear checkpoint database
To clear the checkpoints configured on the switch, use the clear checkpoint database command.
clear checkpoint database [system | user]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to clear the configured checkpoints:
switch# clear checkpoint database
.Done
switch#
Related Commands
system Clears the configuration rollback checkpoint database for system
checkpoints.
user Clears the configuration rollback checkpoint database for user checkpoints.
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
checkpoint Creates a checkpoint.
show checkpoint Displays all configured checkpoints.