Cisco Nexus 5500 Series - Show Vlan Access-List

337
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show vlan access-list
show vlan access-list
To display the contents of the IPv4 access control list (ACL) or MAC ACL associated with a specific
VLAN access map, use the show vlan access-list command.
show vlan access-list map-name
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines For the specified VLAN access map, the switch displays the access map name and the contents of the
ACL associated with the map.
Examples This example shows how to display the contents of the ACL associated with the specified VLAN access
map:
switch# show vlan access-list vlan1map
Related Commands
map-name VLAN access list to show.
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
ip access-list Creates or configures an IPv4 ACL.
mac access-list Creates or configures a MAC ACL.
show access-lists Displays information about how a VLAN access map is applied.
show ip access-lists Displays all IPv4 ACLs or a specific IPv4 ACL.
show mac access-lists Displays all MAC ACLs or a specific MAC ACL.
vlan access-map Configures a VLAN access map.