Cisco Nexus 5500 Series - Show Ssh Server

323
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show ssh server
show ssh server
To display the Secure Shell (SSH) server status, use the show ssh server command.
show ssh server
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the SSH server status:
switch# show ssh server
ssh version 2 is enabled
switch#
Related Commands
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
ssh server enable Enables the SSH server.