Cisco Nexus 5500 Series - Role Feature-Group Name

231
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter R Commands
role feature-group name
role feature-group name
To create or specify a user role feature group and enter user role feature group configuration mode, use
the role feature-group name command. To delete a user role feature group, use the no form of this
command.
role feature-group name group-name
no role feature-group name group-name
Syntax Description
Command Default None
Command Modes Global configuration mode
Command History
Examples This example shows how to create a user role feature group and enter user role feature group
configuration mode:
switch(config)# role feature-group name MyGroup
switch(config-role-featuregrp)#
This example shows how to remove a user role feature group:
switch(config)# no role feature-group name MyGroup
switch(config)#
Related Commands
group-name User role feature group name. The group-name has a maximum length of 32
characters and is a case-sensitive, alphanumeric character string.
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
feature-group name Specifies or creates a user role feature group and enters user role feature
group configuration mode.
show role
feature-group
Displays the user role feature groups.