292
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter       Show Commands
show ip dhcp snooping statistics
show ip dhcp snooping statistics
To display Dynamic Host Configuration Protocol (DHCP) snooping statistics, use the show ip dhcp 
snooping statistics command.
show ip dhcp snooping statistics
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Any command mode
Command History
Examples This example shows how to display DHCP snooping statistics:
switch# show ip dhcp snooping statistics 
Packets processed 61343
Packets received through cfsoe 0
Packets forwarded 0
Packets forwarded on cfsoe 0
Total packets dropped 61343
Packets dropped from untrusted ports 0
Packets dropped due to MAC address check failure 0
Packets dropped due to Option 82 insertion failure 0
Packets dropped due to o/p intf unknown 0
Packets dropped which were unknown 0
Packets dropped due to dhcp relay not enabled 0
Packets dropped due to no binding entry 0
Packets dropped due to interface error/no interface 61343
Packets dropped due to max hops exceeded 0
switch#
Related Commands
Release Modification
5.2(1)N2(1) This command was introduced.
Command Description
copy running-config 
startup-config
Copies the running configuration to the startup configuration.
ip dhcp snooping Globally enables DHCP snooping on the device.
show running-config 
dhcp
Displays the DHCP snooping configuration.