Cisco Nexus 5500 Series - Show Ip Arp Sync-Entries

288
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show ip arp sync-entries
show ip arp sync-entries
To display the Address Resolution Protocol (ARP) table information after an ARP table synchronization,
use the show ip arp sync-entries command.
show ip arp sync-entries [detail | vrf {vrf-name | all | default | management}]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the global ARP statistics on virtual port channels (vPCs):
switch# show ip arp sync-entries
Related Commands
detail (Optional) Displays detailed information about the ARP table.
vrf (Optional) Displays ARP table information for a virtual routing and
forwarding (VRF) instance.
vrf-name VRF name. The name can be a maximum of 32 alphanumeric characters and
is case sensitive.
all Displays ARP table information for all VRF entries.
default Displays ARP table information for the default VRF entry.
management Displays ARP table information for the management VRF entry.
Release Modification
5.1(3)N1(1) This command was introduced.
Command Description
ip arp synchronize Enables ARP synchronization on a vPC domain.
show running-config
arp
Displays the running configuration information for ARP tables.