Cisco Nexus 5500 Series - Show Privilege

298
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show privilege
show privilege
To show the current privilege level, username, and status of cumulative privilege support, use the show
privilege command.
show privilege
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines When the feature privilege command is enabled, privilege roles inherit the permissions of lower level
privilege roles.
Examples This example shows how to view the current privilege level, username, and status of cumulative privilege
support:
switch# show privilege
User name: admin
Current privilege level: -1
Feature privilege: Enabled
switch#
Related Commands
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
enable Enables a user to move to a higher privilege level.
enable secret priv-lvl Enables a secret password for a specific privilege level.
feature privilege Enables the cumulative privilege of roles for command authorization on
RADIUS and TACACS+ servers.
username Enables a user to use privilege levels for authorization.