Cisco Nexus 5500 Series - Role Name

232
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter R Commands
role name
role name
To create or specify a user role and enter user role configuration mode, use the role name command. To
delete a user role, use the no form of this command.
role name {role-name | default-role | privilege-role}
no role name {role-name | default-role | privilege-role}
Syntax Description
Command Default None
Command Modes Global configuration mode
Command History
role-name User role name. The role-name has a maximum length of 16 characters and
is a case-sensitive, alphanumeric character string.
default-role Specifies the default user role name.
privilege-role Privilege user role, which can be one of the following:
• priv-0
• priv-1
• priv-2
• priv-3
• priv-4
• priv-5
• priv-6
• priv-7
• priv-8
• priv-9
• priv-10
• priv-11
• priv-12
• priv-13
Release Modification
5.2(1)N1(1) This command was introduced.