Cisco Nexus 5500 Series - Deadtime

36
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
deadtime
To configure the dead-time interval for a RADIUS or TACACS+ server group, use the deadtime
command. To revert to the default, use the no form of this command.
deadtime minutes
no deadtime minutes
Syntax Description
Command Default 0 minutes
Command Modes RADlUS server group configuration
TACACS+ server group configuration
Command History
Usage Guidelines You must use the feature tacacs+ command before you configure TACACS.
Examples This example shows how to set the dead-time interval to 2 minutes for a RADIUS server group:
switch(config)# aaa group server radius RadServer
switch(config-radius)# deadtime 2
This example shows how to set the dead-time interval to 5 minutes for a TACACS+ server group:
switch(config)# aaa group server tacacs+ TacServer
switch(config-tacacs+)# deadtime 5
This example shows how to revert to the dead-time interval default:
switch(config)# aaa group server tacacs+ TacServer
switch(config-tacacs+)# no deadtime 5
minutes Number of minutes for the interval. The range is from 0 to 1440 minutes.
Setting the dead-time interval to 0 disables the timer.
Release Modification
5.2(1)N1(1) This command was introduced.