Cisco Nexus 5500 Series - Clear Ip Arp Inspection Statistics Vlan

29
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter C Commands
clear ip arp inspection statistics vlan
clear ip arp inspection statistics vlan
To clear the Dynamic ARP Inspection (DAI) statistics for a specified VLAN, use the clear ip arp
inspection statistics vlan command.
clear ip arp inspection statistics vlan vlan-list
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Examples This example shows how to clear the DAI statistics for VLAN 2:
switch# clear ip arp inspection statistics vlan 2
switch#
This example shows how to clear the DAI statistics for VLANs 5 through 12:
switch# clear ip arp inspection statistics vlan 5-12
switch#
This example shows how to clear the DAI statistics for VLAN 2 and VLANs 5 through 12:
switch# clear ip arp inspection statistics vlan 2,5-12
switch#
Related Commands
vlan vlan-list Specifies the VLANs whose DAI statistics this command clears. The
vlan-list argument allows you to specify a single VLAN ID, a range of
VLAN IDs, or comma-separated IDs and ranges. Valid VLAN IDs are from
1 to 4094, except for the VLANs reserved for the internal switch use.
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
clear ip arp inspection
log
Clears the DAI logging buffer.
ip arp inspection
log-buffer
Configures the DAI logging buffer size.
show ip arp inspection Displays the DAI configuration status.
show ip arp inspection
vlan
Displays DAI status for a specified list of VLANs.