Cisco Nexus 5500 Series - Telnet Server Enable

349
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter T Commands
telnet server enable
telnet server enable
To enable the Telnet server, use the telnet server enable command. To disable the Telnet server, use the
no form of this command.
telnet server enable
no telnet server enable
Syntax Description This command has no arguments or keywords.
Command Default Enable
Command Modes Global configuration mode
Command History
Examples This example shows how to enable the Telnet server:
switch(config)# telnet server enable
This example shows how to disable the Telnet server:
switch(config)# no telnet server enable
Related Commands
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
show telnet server Displays the Telnet server status.