Cisco Nexus 5500 Series - Show Startup-Config Radius

330
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show startup-config radius
show startup-config radius
To display RADIUS configuration information in the startup configuration, use the show startup-config
radius command.
show startup-config radius
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the RADIUS information in the startup configuration:
switch# show startup-config radius
Related Commands
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
show running-config
radius
Displays RADIUS server information in the running configuration.