Cisco Nexus 5500 Series - Show Running-Config Radius

319
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show running-config radius
show running-config radius
To display RADIUS server information in the running configuration, use the show running-config
radius command.
show running-config radius [all]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display information for RADIUS in the running configuration:
switch# show running-config radius
!Command: show running-config radius
!Time: Wed Aug 25 10:25:41 2010
version 5.2(1)N1(1)
radius-server host 192.168.1.1 key 7 "KkwyCet" authentication accounting
aaa group server radius r1
server 192.168.1.1
switch#
Related Commands
all (Optional) Displays default RADIUS configuration information.
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
show radius-server Displays RADIUS information.